Drywall Repair How to Properly Repair Your Water Damaged Drywall

If you see black mold forming on your drywall or you see that your drywall is water damaged, then you may have leaks in your home. It can be plumbing leaks or it can also be roofing leaks. It may not seem like this is a serious problem, but you need to keep in mind that water damage on drywalls is a project that you should take seriously and also take priority on.
If you are looking for water damage on your drywall, look for the tell tale signs, such as bulging, cracks, sagging, and discoloration. You need to remember that water can easily drip and run along interior pipes in your home and it can also run from a leaky roof down to your drywall. This is why you have to look for damage on both the walls and the ceilings and you shouldn’t be surprised to find damage that is further achoice from the leak.
If you suspect or you are well aware of the fact of water damage in your home, you have to prioritize this kind of problem immediately. Why?
Well, wet drywall will be able to provide an ideal environment for mold and mildew to grow, which can really complicate your drywall repair project.
When you find only small cracks, the water damage can be easy to fix. All you need is a ready mixed spackling compounds which are ideal for this kind of situation. This particular compound can be easily applied with a putty knife. For that structural patch, you can use a strip of fiberglass tape. Use this on to the area where you intent on applying the putty.
However, if you find a larger repair, it will require you to do a lot more structural work.
The first step in repairing large portions of water damaged drywall is to completely remove the affected area. You will need a jigsaw or a drywall handsaw for this. When removing the water damaged drywall patch, be on the lookout for molds and mildew. You need to keep in mind that drywalls that are already affected with mold or mildew cannot be saved and the surrounding areas should be thoroughly cleaned before any repairs begin.
You also need to make sure that before you start patching up your drywall, the drywall should be completely dry. Try using an industrial fan to circulate air in to the area and you may also want to use a dehumidifier. These things will ensure complete drying.
Once the area is completely dry, the next step is to get a drywall patch that you will use to replace the piece of drywall that is removed because of water damage. You will find that there are now water resistant drywalls available for sale. This is basically your best option when you are repairing water damaged drywall. For large holes, you may want to use a plywood backer for support.
After screwing or nailing the replacement patch on the hole, the joint edges of the patch should be taped using a fiberglass drywall tape and it should be covered with drywall mud. After the mud has cured, you need to sand it to smooth out the surface and paint it to get the repaired area to blend in with the rest of the wall.
These are the things that you have to remember when repairing water damaged drywall. With these tips, you can easily get your drywall repaired and you will be able to get it done with a professional look.

Read More..

Drywall Repair Tips How to Repair Popped Nails in Your Drywall

Today, using screws are now very common when installing drywalls. However, in some areas, nails are still used for this kind of job. If you have drywalls in your home that was installed using nails, then you may encounter some problems with it. There will be a time where the nails may come loose and can pop through the surface. Not only that this is unattractive, but it is also dangerous as your body may get snagged on the loose nail and cause injuries.
If you inspect your home closely, you may find some popped nails around the edge of ceilings and also on external walls where temperatures can get extreme. You have to remember that extreme temperatures can have different effects on metal and the surrounding wood.
The head of the nails may get a small amount of condensation, which can lead to rust discoloring. This can cause the head of the nail to fall of entirely, which is what you don’t want to happen. This is very common on older houses and on some cases the nails may pop out if the house has settled somewhat over time.
If you think that your house has settled too much or too quickly, you have to contact a home inspector in order for you to find out what caused it. It may mean that structural repairs may be needed, which means that it will be of no use addressing to the cosmetic issues of popped nails.
When it comes to popped nails on drywalls, you have to remember that you cannot fix it by tapping the nail back in the wood. The cause of making the hole where the nail used to be to become slightly larger than the nail cannot be fixed and the nail you tap back in will eventually move again some time later.
If you want to hold the nail securely, you can do this by simply tapping in another nail. To make sure that the new nail will go in to the wood behind, you can drive a drywall nail next to the popped nail. This will enable the new nail head to overlap the popped nail. After doing this, you have to drive the nails to a slight dimple. You can test if the nails are driven in far enough with the use of metal putty knife by dragging this tool across it. When you feel that the nail heads are dragging, drive them in a bit more.
Filling the dimple that you made is also a lot easier thanks to color changing fillers. The bright pink is a popular choice as it turns to white when it dries.
With this, you will be able to finish the job with two or three coats and a light sanding between applications will ensure a smooth finish.
As you can see, repairing popped nails on your drywall is very easy. Just follow these tips and you will be able to get your drywall looking great again and also prevent the nails from popping out again.

Read More..

How to Repair Popped Nails in Your Drywall

When installing drywalls today, you will see that most people use screws. However, there are still quite a lot of people who install drywalls using nails. This can work but the problem with nails is that it is known to become loose and pop out through the surface.
Popped out nails aren’t only unpleasing to look at but it can also be dangerous, and can cause injuries. This is why you have to get popped out nails. In some cases, you will find popped nails around the edge of ceilings and also on external walls. These spots are where extreme temperatures can directly affect the wood and the metal. You have to consider the fact that extreme temperatures have different effects on wood and metal. It can cause the heads of the nails to get a small amount of condensation, which can lead to rust, which will discolor the attached spackling. It will also discolor the drywall material, which you really don’t want to happen.
The rust can even get the material on the head of the nail to fall of entirely.
There are also cases where nails may pop if the house has settled somewhat over time. If you do suspect that your home has settled too much or too quickly, it is very important for you to contact your local home inspector as this can mean structural damage to your home. If structural damage is present, it is important for you to get this fixed first before you concern yourself with the cosmetic issues of popped nails on your drywall.
You have to remember that you cannot fix a popped nail by just tapping it in back in the wood. You have to remember that the nail hole will be slightly oversize and this cannot be fixed. If you just tap the nail back in, it will move again later and get popped out again. The key to repairing popped nails on your drywall is to find a choice to hold the nail securely and one of the simplest and most effective as well as popular choices to do this is by using another nail.
When driving your new nail in to the wood behind, you first need to drive a drywall nail next to the popped nail. This will get the new nail’s head overlap the top of the old one or the popped one. After doing this, you can now drive the nails to a slight dimple. You can test that the nails are already driven far enough by using a metal putty knife and dragging it across the nail. If you feel that the nail heads are dragging, you can simply drive them in a bit more.
The next step is to fill the dimple you made on the wall. You can use color changing fillers. The bright pink ones are very popular as it changes to white when it dries. Through these steps, you will be able to finish the jobs in two or three coats. You should remember to give it a slight sanding between applications.
These are the things that you should remember when repairing popped nails in your drywall. With these tips, you will be able to repair popped nails in your drywall and give a professional looking finish.

Read More..

Drywall Water Damage Helpful and Effective Ways to Repair Your Drywall

We have to admit the fact that we spend a lot of money in order to make the interior of our home beautiful. In fact, getting drywall installed alone can cost you hundreds of dollars not to mention the fact that you get it finished and textured, which will eventually make you spend more money. This is why water damage on drywall can be a very serious problem.
If you have a drywall that is water damaged, then there is a great chance that it happened because of leak from the pipes or also because of flooding. It can also be caused by leaks on your roof where rain water enters your home and eventually make its choice to the drywall.
The good news is that drywall water damage is easy to repair. So, just how do you do it?
The first thing that you have to do is to determine where the leak is coming from. You have to remember that when fixing a water damaged drywall, you have to first fix the problem that caused it in the first place. In this case, you have to look for the source of the leak which caused the water damage on your drywall.
You have to keep in mind that nothing is more frustrating than getting the drywall fixed only to have the leak return and damage your newly fixed drywall again.
Now that you fixed the leak, the next step is to cut a hole in to the wet drywall in order to begin air circulation. This can be done with the help of a strong fan and it is also highly recommended that you use a dehumidifier in order to reduce moisture content on the air inside the room where the water damaged drywall is located.
It is very important that you should monitor the drying process closely in order for you to make sure that the drying process is complete. By not completing the drying process properly, you will end up growing mold on the wall within 24 to 48 hours. If this happens, get a mold restoration professional to help in removing the mold. It is crucial that you should not touch the mold as touching it can only lead to the fast spreading of the mold around your home.
Now, after everything is already dry, you can now replace the drywall and any studs that were water damaged. You may need to get a plywood backer if you cut a large hole in order to secure the drywall you mount to cover the hole.
Nail in the patch of water resistant drywall to the backer board and place joint compound over the joints. Allow it to dry and then sand the joint compound for a smooth finish.
After that, you can now tape the joint with the drywall tape where the drywall comes together with the existing wall. Once the edges are smooth, it’s time for you to paint the area in order to match the color to the rest of the wall.
These are basically how you can fix a water damaged drywall. By following these tips, you will be able to repair water damaged drywall in your home and also do so with a professional looking finish.

Read More..