The Proper Way to Patch Your Drywall

We all know how unattractive blemished walls are in the home. No matter how great the wall looks with its textured finish, a hole in the drywall can eventually ruin everything. And, the bad news is that this is something that you can never really avoid. Time will come that you will have a hole somewhere in your home’s wall, which will need some patching up.
The good news about this particular problem is that it is really easy to fix and make it look like that the hole wasn’t even there in the first place
You may need to patch up a hole in your drywall that was the result of getting the piping fixed in your kitchen.
There are basically a lot of causes of holes in the drywall. So, here are some of the things that you can do to fix this type of drywall nightmare.
First off, you will need the proper materials in order for you to efficiently and professionally patch up the hole in the drywall. You will need a joint compound, a drywall tape, orange peel texture, wood screws, drywall, and also some type of scrap wood or simply some plywood.
For the tools, you will need a drill, a putty knife, a sander, and a drywall saw.
First of all, you have to take the drywall saw and cut out the debris. This will help you remove the debris that was accidentally put through the wall. Start around the edge of the damaged area and cut a square sized hole to remove the damaged drywall.
The next step is to cut a piece of wood that is about the same size of the hole you cut on the wall. Just give it a little room on the sides in order for you to put your hand in to hold the wood in place when screwing it. After doing this, you now need to place it in the hole and screw the piece of wood above the hole. Do the same for the opposite corner for both corners at the bottom of the hole.
Then, you will now be able to place a piece of drywall you cut over the wood that you recently fastened on the wall. This will set the drywall in place by screwing it on all four sides. This is the hard part.
After doing this, all you need to do is make the fix unnoticeable. To do this, just get a putty knife and dig out a little compound. Then, press the compound in to the cracks that you see around the newly fixed piece of drywall. After this, you can now get your drywall tape and cut it in to lengths that you need in order for it to cover all the four sides of the cut.
These are the basics on fixing a drywall hole. By following these steps, you will be able to fix your drywall and make it look as if nothing happened. Through these tips, you can fix any hole in your drywall and make it look as if the hole wasn’t even there in the first place.

Read More..

The Proper Way to Paint Your Drywall

Before you consider coloring your drywall, you have to remember that this is a fairly specialized task. However, if you have the proper equipments or tools and do the necessary preparations, you will find that it can be achieved by nearly everyone.
When coloring drywall, you have to know about the step-by-step process in doing it properly. If you neglect to do at least one of the processes, you will end up with a coloring job that looks quite amateurish.
The first step in coloring drywalls is by making sure that the weather is not too humid and it should be fairly warm. You also have to make sure that the surface or the drywall you are planning to pain is dry, free from oil and grease, and that it is completely clean.
You also have to apply 3 coats of joint compound on the drywall and the joints between the panels should be taped with fiberglass or paper mesh tape or drywall tape. By doing this, you will ensure that the joint gets surfaced over. You also have to make sure that you fill in any cracks or marks using the same method.
You also have to clean the walls and ceilings that you intend on coloring by wiping off the dust. Do this before priming. After the prime coat has dried, the next step is to sand the surface lightly with a fine grit sandpaper. This will enable you to smooth any imperfections, and raised fibers as well as rough chips. Alchoices keep in mind that you need to wear goggles and mask as the gypsum dust produced when sanding drywalls can be very irritating to the eyes and is known to cause breathing problems.
You should also take care in removing dust from the top of your doorchoice as well as in the window trims. You also have to use drop cloths in order to protect finished flooring as well as doors, windows, and other fixtures. It is highly recommended that you use a painter’s plastic to do this.
You need to keep in mind that after you taped the drywall and sanded it, you shouldn’t allow the drywall to sit too long. The sunlight can cause the drywall to yellow and fade. In fact, it can look uneven even after coloring it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process.
Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color of the top coat. For the top coat, use two coatings of gloss paint, which includes eggshell and satin paint. This will leave you with a finish that is easy to wash and one that is not prone to smudges and marks. For the roof, flat paint is a good option.
Alchoices remember that with the proper equipments and preparation, you will be able to have a professional looking finish when coloring your drywall.

Read More..